Features description 4-23
Meridian 1 Options 201, 211 Meridian SL-100 M3000 Touchphone Reference Manual MSL03
Procedure 4-14 describes how to activate Ring Again (RAG).
Procedure 4-14
Ring again feature
Busy, EWRT, or No Circuits occurs. Touch the ring Again (RAG) touch position.
Response: If the request is allowed, the RAG indicator appears on the Bar
Line. The Screen changes to IDLE.
Note: The No Circuit (NC) condition must occur at the Sl-100 outgoing end.
Distant switch NC conditions do not apply.
Procedure 4-15 describes how to activate call park.
Procedure 4-15
Call park feature
The call is in the ESTABLISHED (talking) state. Touch the PARK touch
position.
Response: The call is parked against the DN of the M3000 Touchphone. A
confirmation tone occurs. Screen changes to the IDLE state.
Procedure 4-16 describes how to retrieve calls from call park.
Procedure 4-16
Call park retrieval feature
Touch an idle DN position.
Response: A dial tone occurs.
Enter the call park retrieve access code defined in Table IBNXLA and the DN
from which the call was parked.
Response: Call is connected.
Data call
When an M3000 Touchphone is equipped with the Touch Asynchronous
Data Option (TADO), the user makes a data call using Meridian SL-100
Keyboard Dialing or Hayes Keyboard Dialing from the attached terminal.
Voice and data communications are carried simultaneously without
interference.
Operating a Carriage return on the keyboard activates data call
communications. Only one data call in progress is allowed when a data call
originates.
The TADO is compatible with all data terminals having the characteristics
described in Chapter 3, Table 3-2, “TADO data characteristics”. An M3000
Touchphone equipped with TADO originates or terminates data calls from
1
1
1
2
