manualshive.com logo in svg

Northern Telecom Meridian M3000, Reference Manual

Share
Download
Northern Telecom Meridian M3000 Reference Manual Download Page 38

4-12   Features description

555-4001-112   Standard 05.01   March 1995

Table 4-5xxx
Programmable touch position functions 

Telephone State

Text Displayed On Screen

Possible Actions

Incoming voice call on idle DN

Notify line displays DN if the
call originates within the
Meridian SL-100.  Otherwise,
trunk group information is
displayed.  If the DN or trunk
group is in the M3000
Touchphone’s private directory,
the name is displayed.

Touch flashing icon and lift
handset or activate
Handsfree option to connect
to call.

Incoming call on an active DN
while dialing or during ringback

Prompt line displays
CONNECT WAITING CALL?.
Bar Line displays the
CONNECT touch position.

Touch CONNECT position to
access call immediately.
Previous activity is
terminated.  If no action is
taken before call waiting
timeout occurs, the waiting
call is disconnected.

Incoming call on idle DN while
M3000 Touchphone is active on
another DN

Prompt line displays
CONNECT WAITING CALL?.
Bar Line displays the
CONNECT touch position.

Touch CONNECT position to
connect call.

Prompt line displays TOUCH
HOLD.  If the M3000
Touchphone was performing a
local function, that function is
terminated.

Touch HOLD position.  The
previous call is put on hold,
and the waiting call is
connected.  After the waiting
call is terminated, press DN
to reconnect the original call.

Note 1:  If the DTE is set to Automatic Answer, all data calls are answered automatically by the
terminal.  If the DTE is on but not set to Automatic Answer, the incoming data call can be connected
by touching the Y and the Carriage Return on the keyboard.
Note 2:  Activating Ring Again when the Ring Again is already in effect for a previous call causes
the previous Ring Again to be canceled.  Ring Again is canceled by touching the CANCEL RING
AGAIN touch position on the RING AGAIN screen, which is accessed by touching the RING AGAIN
position on the IDLE screen.

-continued-

Summary of Contents for Meridian M3000































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands