O6108 08/01
27
Lugger Specifi cations
Output Rating
High Output
Medium Duty
Continuous Duty
Horsepower/Rated
RPM
410 HP/2700 RPM
370 HP/2600 RPM
300 HP/2300 RPM
Cooling
(General)
Fresh
water
fl ow at rated speed
US gal (L)
79 (300)
76 (288)
67 (253)
Heat rejection to jacket water
including engine and marine gear
BTU/Min
12,710
11,470
9,600
Cooling (Heat Exchanger)
Raw water intake diameter
in (mm)
2 (51)
2 (51)
2 (51)
Raw water discharge diameter
in (mm)
1.63 (41)
1.63 (41)
1.63 (41)
Raw water pump fl ow
US gal/Min (L/Min)
67 (253)
65 (246)
57 (216)
Raw water pump max. suction head
in (m)
39 (1)
39 (1)
39 (1)
Maximum raw water temp at inlet
o
F (
o
C)
85 (30)
85 (30)
85 (30)
Freshwater system capacity
US gal (L)
4.5 (17)
4.5 (17)
4.5 (17)
Cooling (Keel Cooled)
Water hose inside diameter
in (mm)
2 3/8 (60)
2 3/8(60)
2 3/8 (60)
Head diameter
in NPT
2
2
2
Turbo tube length*
ft (m)
60 (18.3)
52 (15.9)
42 (12.6)
Skin cooler aluminum*
ft
2
(m
2
)
62 (5.8)
56 (5.2)
45 (4.2)
Skin cooler steel*
ft
2
(m
2
)
210 (19.5)
185 (17.2)
150 (13.9)
*Based on 70
o
F(21
o
C) seawater & min. boat speed of 8 knots
at full RPM. Keel cooler return water 120-165
o
F (50-75
o
C).
Electrical
Minimum battery capacity
amp hours
200
200
200
Battery cable size up to 10 ft. run
1/0
1/0
1/0
Standard instrument harness length
ft (m)
20 (6)
20 (6)
20 (6)
Air
Air consumption at rated speed
ft
3
/Min (m
3
/Min)
844 (25.4)
801 (23)
700 (20)
Minimum engine room vent area
in
2
(cm
2
)
240 (1548)
215 (1387)
190 (1266)
Exhaust
gas
fl ow at rated speed
ft
3
/Min (m
3
/Min)
1960 (56)
1800 (52)
1530 (44)
Exhaust gas temp. at rated speed
o
F (
o
C)
975 (524)
920 (497)
950 (510)
Maximum exhaust back pressure
in (cm) H
2
O
30 (76)
30 (76)
30 (76)
Suggested dry exhaust ID
in (mm)
5 (127)
5 (127)
5 (127)
Suggested wet exhaust ID
in (mm)
6 (152)
6 (152)
6 (152)
Fuel and Oil
Minimum fuel suction line
in (mm)
3/8 (10)
3/8 (10)
3/8 (10)
Minimum fuel return line
in (mm)
3/8 (10)
3/8 (10)
3/8 (10)
Maximum fuel pump head
in (m)
39 (1)
39 (1)
39 (1)
Lube oil capacity, including fi lter
US gal (L)
6.2 (23.5)
6.2 (23.5)
6.2 (23.5)
Gear, PTO, Engine Angle
Engine rotation (facing fl ywheel)
Counterclockwise
SAE
fl ywheel housing size (fl ywheel)
Standard SAE 3 (11.5")
Front PTO SAE housing (carrier)
SAE 3 (11.5")
Maximum engine installation angle
0
o
front down, 12
o
rear down
Max. intermittant operating angle (any direction)
15
o
for less than 2 minutes
General Specifi cations
Model Number .................................................. L6108A2
Cylinders.............................................................. Inline 6
Displacement ...................................436 in
3
(7.145 liters)
Operating Cycle .............................................................4
Bore ...................................................... 4.25 in (108mm)
Stroke ...........................................5.12 in (130mm)
Aspiration...................... Turbocharged/Aftercooled
Approx. dry weight, less gear, with
keel cooling ............................ 1622 lbs (735 kg)
heat exchanger ........................ 1682 lbs(763 kg)
(Weight depends on SAE housing, cooling & options.)
Summary of Contents for LUGGER L6108
