4
•
WARNING
:
The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood by the
operator that common sense and caution are factors that cannot be built into this product, but must be
supplied by the operator.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY CONSIDERATIONS
•
Proper installation of this product requires the installer to have a good understanding of circuitry.
•
Please operate your barn light according to Operation Method and retain the proper operation
procedures.
•
Before attempting to install your barn light, ensure power to outlet box is off for your own safety.
•
WARNING
:
Connect green fixture wire to grounding screw in junction box.
•
WARNING
:
Do not touch the steel parts when it is working.
•
Do not use any harsh abrasives, detergents or anything containing ammonia to clean your barn
light.
•
Bulb is not included with the barn light; use a standard E26 bulb only.
•
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD
RESULT IN DAMAGE TO THE PRODUCT OR SERIOUS INJURY TO YOU!
LIGHT USE AND CARE
•
Do not modify the light in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the barn
light was designed.
•
Check damaged or worn out parts before using the barn light. Broken parts will affect the barn
light operation. Replace or repair damaged or worn parts immediately.
ASSEMBLY
1. Disconnect power at main electrical box before installing fixture.
2. Insert the screws (8) through the mounting base (7). Run wires from the junction box through
mounting base (7), gasket (6).
3. Attach the ballast black wire to the supply black wire and the ballast white wire to supply white
wire, using wire nuts (12) provided.
