5
4. Connect 2 green fixture wires (1 in the cord and 1 on the back plate) to grounding screw in the
junction box.
5. Attach the mounting base (7) on the junction box by tapping screws (10). Attach the back plate (5)
to the mounting base (7); make sure the screws (8) insert into the hole on the back plate (5).
6. Align the mounting base (7) and back plate (5) by tightening the cap nut (9) to the screws (8).
** Adjust wire for high or low ceiling: Loosen the wire lock on the 10 ft. wire, move it to the suitable
location on the wire, then tighten it. Cut off the extra parts, and then connect the wire (refer to steps 3 and
4).
OPERATION
•
Make sure to shut down the power supply. Remove the cage (2) and mount a standard E26 bulb
into the light, then mount the cage. Turn on the power supply. Refer to the chart below for
acceptable bulb types:
Watts
Bulb Type
100 Watts Max.
A19 Lamp, E26 Base
200 Watts Max.
A21 Lamp, E26 Base
MAINTENANCE
•
Maintain your barn light. It is recommended that the general condition of any barn light be
examined before it is used. Keep your barn light in good repair by adopting a program of
conscientious repair and maintenance. Have necessary repairs made by qualified service
personnel.
