Handlebar Assembly
1.
Straighten the handlebar until is it perpendicular to the ground and lock the handlebar
stem safety locking mechanism in place.
2.
Insert the loose handlebar into the handlebar stem with the brakes facing outward and
push down. You may raise and lower the handlebar as you wish until
you find a height
comfortable for riding. This means that you can easily reach the
brakes for safe
control of the SYNERGY STEP. When this is complete, simply pull
the handlebar
rotation quick release backward to secure the handlebars
in place. Please ensure the
lever is snug and there is no movement.
3.
For safety assurance, tighten the handlebar bolts using a torque wrench to 6-8Nm,
handlebar stem bolt to 13-15Nm and end bolts to 4-5Nm.
IMPORTANT: Make sure the handlebar fits tightly into the handlebar rotation quick release,
and that the handlebar height quick release and handlebar stem locking mechanism are
securely fastened. Failure to do so could result in loss of control of your SYNERGY
STEP
and could cause you serious injury
.
Saddle (seat) and Seat Post Assembly
1.
Remove the seat post wrapping.
2.
Loosen the seat post quick release.
3.
Insert the seat pos
t
to the desired height before securing it in place with the
quick
release.
4.
For safety assurance, tighten the saddle bolt to 22Nm with a torque wrench before
you
ride.
8