PRODUCT REPLACEMENT
It is always
recommended
to keep spare tires, inner tubes, lube, chain
s and
brake pads on hand as
these items are worn out most
q
uickly.
If a product is in need of replacement and you are not completely certain how to do this, it is
recommended to take it to your local bike dealer. This includes cables/housing, bearing
adjustments, brake adjustment and wheel adjustments. Be sure to replace parts with original
SYNERGY STEP bike components to ensure optimal level of performance.
WARNING: As with all mechanical components, the SYNERGY STEP is subject to wear and high
stresses. Different materials and components may react to wear or stress fatigue in different ways.
If the design life of a component has been exceeded, it may suddenly fail
, potentially
causing
injury to the rider. Any form of crack
s
, scratches, or change of colouring in highly stressed areas
indicate that the life of the component has been reached and it should be replaced.
Failure to repair or replace worn components could reduce your ability to control your SYNERGY
STEP and could cause serious injury.
2
0
GENERAL TIPS
▪
While our SYNERGY STEP bikes are splash-proof, their electrical components should
not
be submerged in water. Water damage is NOT covered under the manufacturer
war
ranty,
so we strongly discourage any use in the rain.
▪
When washing your bike, use ONLY a
damp cloth. Do not spray any water directly on
your SYNERGY STEP as it could result in water damage.
▪
To prevent corrosion, dry the SYNERGY STEP and its components after every wet ride.
Store bike and battery in a dry location.
IMPORTANT! Do not attempt to open the casings of the battery, motor, or controller. This can be
dangerous and will void any warranties by doing so. If you experience a problem, please contact
our service department or your local bike shop.