manualshive.com logo in svg

NORTH49 BRANDS SYNERGY STEP 2020, Manual, Page: 5 / 21

Share
Download
NORTH49 BRANDS SYNERGY STEP 2020 Manual Download Page 5

SAFETY FIRST

 If you are unfamiliar with any aspect of this manual, it is advised that you take your SYNERGY STEP 
and this manual to a local bike shop for inspection, assembly and instructions.

➢

It is extremely important that you follow the safety guidelines contained in this manual in order to

 

ensure maximum safety for you as well as maximum durability of yo

u

 SYNERGY STEP.

➢

Before you ride your SYNERGY STEP for the first time, please be 

sure bike 

has

 

been

 

correctly 

assembled.  You will find step

 

by

 

step instructions in this manual. 

If f

or any

 

reason you

 

are 

un

certain

 about your bike's assembly

 please bring it to your nearest bike shop.

➢

Key assembly steps that mu

st

 be completed with absolute certainty (

including

 secure fastening)

 

are 

pedals, saddle height, handlebars (both rotation and height) and wheels

➢

Please ensure all safety latches, including quick releases and rings, are locked in place and snug

 

without any movement.

➢

Please ensure all bolts (including the front/rear wheels, saddle bolt and brake rotors) are properly

 

tightened. Certain components must be tightened to exact specifications using a torque wrench for

 

safety assurance. Fixed front wheel axle nut: 28-32Nm, Fixed rear wheel axle nut: 30-35Nm,

 

Handlebar bolts: 6-8Nm, Handlebar stem bolt: 13-15Nm, Bar end bolts: 4-5Nm, Saddle bolt:

 

22Nm.

➢

Test your brakes prior to using the SYNERGY STEP every time. In wet or icy conditions, use

 

extra

 

caution.

➢

Check your tire pressures frequently.  They should be pumped to 1.4 bar (20 psi). Low tire

 

pres

sures 

could

 result in damage to the tires and rims.

➢

Always wear a helmet when riding any bike or e-bike.

➢

Please observe all traffic regulations and other applicable laws.

➢

Don’t drink and ride. Even a small amount of alcohol can impair your judgment and lower

 

your

 

ability to remain safe.

➢

SYNERGY STEP are not toys.  All riders must be at least 16 years old.

➢

The SYNERGY STEP is meant to be ridden by a single person. 

The  t

otal recommended weight of

 

a 

rider, including all items such as 

a 

backpack

,

 is 150 kg (330 1bs).

 5

Summary of Contents for SYNERGY STEP 2020






















Reviews:

No comments