manualshive.com logo in svg

North Atlantic 8810A, Programmer'S Reference Manual

Share
Download
North Atlantic 8810A Programmer'S Reference Manual Download Page 42

 

 

 

 

 

 

 

 

 

                          Soft Panel Program 

 

 

8810A Programmer’s 

 

When checked, the 
changes will apply when 
the Set button is clicked. 

“Sets” are allowed only when 
the API-8810A unit is set for 
Remote mode with specified 
communication interface (IEEE, 
USB, or Ethernet) 

On units where Internal 
Reference is not available,  
API-8810A will return the 
default settings: 
Voltage: 26 v 
Frequency: 400 Hz 
Ref Out: Not Available 

When checked, angle data for Channel 1 and 
Channel 2 will be written to the file specified 
during ”Cont Read” mode. The data is 
written as follows (tab-delimited):

 

 
1 

230.2710 314.4984  

2 

231.2988 316.3996  

3 

232.1987 319.0801  

4 

233.0217 322.1867  

5 

233.6806 325.3922  

6 

234.2289 328.4045  

7 

234.6222 330.6965  

8 

234.9082 332.2267  

9 

235.0213 332.8417  

North Atlantic Industries, Inc. 

631.567.1100/631.567.1823 (fax)               Revision 2.0.0.2 

Reference Guide 

110 Wilbur Place, Bohemia, NY 11716 

www.naii.com

 / e-mail:[email protected]       

Page 42 of 50 

 

Summary of Contents for 8810A



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands