manualshive.com logo in svg

North Atlantic 8810A, Programmer'S Reference Manual

Share
Download
North Atlantic 8810A Programmer'S Reference Manual Download Page 4

 

 

 

 

 

 

 

 

 

 

 

      Remote Setup 

 

2 Remote 

Setup 

To enable remote operation capabilities via IEEE-488, USB, Ethernet and J1 connection (50 pin 
DSUB connector in back of the unit), the unit must be configured for remote operation. 

 

 

8810A Programmer’s 

 
Click on the button labeled “Loc/Rem” to view the Local/Remote Configuration screen: 
 

 

 

In “Local” mode, the configuration settings can be queried.  The unit must be in one of the 
“Remote” modes (Ethernet, IEEE, USB or J1) before configuration settings can be changed 
remotely. Note, for remote programming via the IEEE interface, the language type must be 
selected, refer to section 3 on language support. 
 

North Atlantic Industries, Inc. 

631.567.1100/631.567.1823 (fax)               Revision 2.0.0.2 

Reference Guide 

110 Wilbur Place, Bohemia, NY 11716 

www.naii.com

 / e-mail:[email protected]       

Page 4 of 50 

 

Summary of Contents for 8810A



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands