background image

  Operating Instructions and Parts List 

AR112

5

www.arnorthamerica.com

“ON”.  Running pump dry 
causes damage.

In a double-insulated product, 
two systems of insulation are 
provided instead of grounding.  No 
grounding means are provided for 
a double-insulated product, nor 
should grounding means be added 
to the product. 

Servicing a double-insulated 
product requires extreme care and 
knowledge of the system, and 
should be done only by qualified 
service personnel.  

Replacement parts for a double-
insulated product must be identical 
to the original parts.  A double-
insulated product is marked with 
the words “Double Insulation” or 
Double Insulated”.  Product may 
also be marked with symbol shown 
below.

Do not use 
pressure that 

exceeds the operating pressure 
of any of the parts (hoses, 
fittings, etc.) in the pressurized 
system.  Ensure all equipment and 
accessories are rated to withstand 
the maximum working pressure of 
the unit.

Do not spray 
electrical 

apparatus and wiring.

•  Never disconnect the high 

pressure discharge hose from 
the machine while the system 
is pressurized.  To depressurize 
machine, turn power and water 
supply off, then press gun 
trigger 2 - 3 times.

•  Never permanently engage the 

trigger mechanism on the gun.

•  Never operate the machine 

without all components 
properly connected to the 
machine (handle, gun/wand 
assembly, nozzle, etc.).

Equipment 

damage.

•  ALWAYS turn water supply 

“ON” before turning pressure 
washer “ON”.  Running pump 
dry causes serious damage.

•  Do not operate the pressure 

washer with the inlet water 
screen removed.  Keep screen 
clear of debris and sediment.

•  NEVER operate pressure washer 

with broken or missing parts.  
Check equipment regularly 
and repair or replace worn or 
damaged parts immediately.  

•  Use only the nozzle supplied 

with this machine.

•  Never leave the wand 

unattended while the machine 
is running.

•  Never attempt to alter factory 

settings.  Altering factory 
settings could damage the unit 
and will void the warranty.

•  Always hold gun and wand 

firmly when starting and 
operating the machine.

S

erVicinG

 

of

 

a

 d

oUble

i

nSUlated

 a

PPliance

Summary of Contents for AR112













Reviews: