Nortel Symposium Agent, Reference Manual

Page: 15 / 38

June 2001 System configurations
Planning and Engineering Guide 15
!
Windows NT 4.0 Option Pack 4.0 (Internet Information Server and
Transaction Server)
Note: You can determine if these components are installed by checking the
list in the Services on Windows NT (from the Start menu, choose Settings
→
Control Panel
→
Services).
!
Microsoft Data Access Components 2.1 (or higher)
!
Remote TAPI Service Provider (available with Microsoft's TAPI 2.1)
!
Sybase Adaptive Server 12
TAPI server hardware and software requirements
In a standalone configuration, a separate server is required in addition to the
Symposium Agent Server. The additional server is required to support installation
of the TAPI SP software. Refer to the following documents to obtain guidelines
for engineering the TAPI Server.
For Meridian 1 switch Refer to the Engineering and Capacity Rules
for Windows NT using the Symposium TAPI
Service Provider for Meridian 1 Release 2
(Document number P0889315)
For DMS-100 or MSL-100 switch Refer to the ICM TAPI Driver Network
Manager's Guide
Symposium Agent Client (agent workstation) requirements
Hardware
!
Pentium II PC 200 MHz or higher
!
Minimum 32 Mbytes of RAM
!
Minimum free hard disk space 25 Mbytes
!
Network Interface Card
Software
!
Windows 95 (upgraded to Microsoft’s TAPI 2.1)
!
Windows 98 or Windows NT 4.0 with Service Pack 5.0
!
Windows 2000 Professional
!
MDAC 2.1 (or higher)
!
Microsoft Internet Explorer 4.0 (or higher)
Symposium Agent (administration workstation) requirements
The Symposium Agent system is administered through an Internet Explorer