manualshive.com logo in svg

Nortel NorStar M7310, System Coordinator Manual

Share
Download
Nortel NorStar M7310 System Coordinator Manual Download Page 88

Forwarding your calls / 75

P0857846 Issue 02

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

If you use 

ALL

 to redirect all your lines, it is important that you wait 

until all the lines on your telephone light up before pressing 

˙

 or 

OK.

 If you press 

˙

 or 

OK 

before all the lines light 

up, those lines not lit will not be redirected.

Canceling Line Redirection  

•

Press 

ƒ£°›

.

•

Select the lines you no longer want to be redirected. 

Allowing a telephone to redirect calls

You can turn a telephone’s ability to redirect calls on and off. 

You will need the programming template found at the front of this 
guide. See Getting Started for more information.

1.

Press 

ƒ••¤flfl‹››

.

2.

Press 

¤‹fl›fl

 (the default System Coordinator 

password).

3.

Press 

≠

 and enter the internal number of the telephone 

you wish to program.

4.

Press 

≠

 twice.

5.

Press 

“

 four times. The display shows 

Allow 

redirect:

.

Tip - 

The line chosen for redirecting calls on other 

lines can still be used normally when it is not busy 
on a redirected call. To avoid redirection failing 
because the chosen line is in use, choose a line 
pool with several lines in it. 

The system does not check that the number you 
give for line redirection is a valid one. If you redirect 
to an invalid number, redirection will fail. Using an 
autodial button to enter the redirection number 
helps avoid this possibility. An autodial button used 
for line redirection must be programmed to use a 
specific line.

ƒ£°›

Summary of Contents for NorStar M7310




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands