manualshive.com logo in svg

Nortel NorStar M7310, System Coordinator Manual

Share
Download
Nortel NorStar M7310 System Coordinator Manual Download Page 85

72 / Forwarding your calls

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

P0857846 Issue 02

Overriding Call Forward 

If you call someone who has their calls forwarded to you, your call 
rings at that person’s telephone even though they are forwarding 
their calls to you.

Changing the automatic Call Forward settings for a 
telephone

Call forwarding occurs automatically when a call is not answered or 
the line is busy. These automatic options are changed in 
programming. 

For step-by-step instructions, see “Change where a call goes when 
there is no answer” on page 22.

Changing Forward no answer

Forward no answer redirects unanswered calls to another telephone 
on your Norstar system.

For step-by-step instructions for changing Forward no answer see 
“Change where a call goes when there is no answer” on page 22.

Line Redirection takes precedence over Forward no answer.

Changing the delay before a call is forwarded

You can assign the number of times that the incoming call rings at 
your telephone before the call is forwarded. To estimate the delay 
time in seconds, multiply the number of rings by six. 

For step-by-step instructions, see “Change the number of times the 
telephone will ring before it is forwarded” on page 22.

Forward on busy

Forward on busy redirects your calls to another telephone on your 
Norstar system when you are busy on a call, or when you have Do 
Not Disturb activated at your telephone.

For step-by-step instructions, see “Making changes to Call Forward 
on Busy” on page 24.

Line Redirection takes precedence over Forward on busy. Calls that 
are redirected by Line Redirection are not affected by any Call 
Forward features or Call Forward programming.

Summary of Contents for NorStar M7310




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands