manualshive.com logo in svg

Nortel NorStar M7310, System Coordinator Manual

Share
Download
Nortel NorStar M7310 System Coordinator Manual Download Page 103

90 / Tracking your incoming calls

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

P0857846 Issue 02

If you accidentally erase an item, you can retrieve it.

•

Press 

˙

 

or

 UNDO

 immediately after accidentally erasing 

an item.

•

Press 

®

 

to exit.

Making a call using Call Log

You may find it helpful to place calls from within your Call Log. The 
number stored for each call may vary depending on the type of call. 
For example, if the call was placed from a Centrex or PBX system, 
the first few numbers may need to be trimmed before you can make 
the call. If the number you want to call is long distance, or if you want 
to use a line pool, you may need to add numbers.

To place a call

•

Display the log item for the call you want to place.

•

Display the associated telephone number.

•

Press

 

√

 

or 

TRIM,

 once for every digit that you want to 

remove.

•

Dial any extra digits required.

•

Press an external line or line pool button.

•

Lift the receiver. (This is not necessary if Handsfree is 
programmed at your telephone.) The displayed number is 
dialed.

Creating a password to your Call Log  

You have the option of accessing your Call Log through a password.

•

Press 

ƒ•°fi

. The displays reads

 New passwrd:

.

•

Enter your four-digit password. The display reads 

Repeat New:

.

•

Re-enter your four-digit password. The display reads

 

Password changed

, which confirms that your password has 

been assigned.

To enter Call Log using your password

•

Press 

ƒ°⁄¤

 to enter Call Log. If you have 

programmed a password, the display reads

 Password:

.

ƒ•°fi

Summary of Contents for NorStar M7310




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands