Nortel N0060609, Installation Manual

Page: 38 / 84

38 Chapter 6 Telephone button icons
N0060609 0.3 N0060609 0.3
Telephone features
Table 4 Telephone features (Sheet 1 of 7)
Feature Description
Background Music FEATURE 86 Cancel: FEATURE #86
Listen to music (provided by an external source or an IP source connected to the system)
through your telephone speaker when you are not on a call.
Button Inquiry FEATURE *0
Check what is programmed on any button. Use when labeling buttons.
Call Duration Timer FEATURE 77
Briefly display the approximate length of your current or most recent call.
Call Forward FEATURE 4 Cancel: FEATURE #4
Send your calls to another telephone in your system.
Call Park FEATURE 74
Put a call on hold so that it can be picked up from any telephone in your system. The display
shows a three-digit retrieval code.
To retrieve a parked call: press an intercom button and dial the retrieval code. On model
7000, 7100, and 2001 telephones, lift the handset and dial the retrieval code.
Call Pickup,
directed FEATURE 76 and the telephone number.
Answer any ringing telephone.
Call Pickup, group FEATURE 75
Answer a call that is ringing at another telephone in your pickup group. The external call that
has been ringing longest is answered first.
Call Queuing FEATURE 801
Answer the next call. If more than one call is waiting, priority is given to incoming external
calls over callback, camped, or transferred calls.
Camp-on FEATURE 82 and the extension number of the receiving telephone
Re-route a call to another telephone even if all lines on that telephone are busy.
Class of Service
Password FEATURE 68 plus CoS password
Change the dialing filters on a line or telephone, or gain external access to your system.
Dialing filters determine which numbers you can dial.
The CoS password is provided by your system administrator to change your class of service.
Conference FEATURE 3
Establish a conference call between yourself and two other parties.
1. Place or answer the first call.
2. Put the first call on hold.
3. Place or answer the second call.
4. After the second call is connected, press
FEATURE 3 .
5. Press the line or intercom button of the first held call (not required on model 7000, 7100, or
2001 telephones).
6. Press RLS to end the conference call.