Nortel Meridian M3901 User Manual Download Page 9

Page: 9 / 146

M3900 Series Meridian Digital Telephone

There are five models in the M3900 Series Meridian Digital Telephone Portfolio.
This document describes the

M3901

M3902

M3903

, and

M3904

features and

how to use them. The

M3902

M3903

, and

M3904

are described in the main

portion of this document. The

M3901

is described in a separate section of this

document. For information on the

M3905

refer to the

M3905 Call Center

Meridian Digital Telephone User Guide

M3901

The

M3901

has one Line (DN) Key and can be programmed with up to five

features.

M3901 telephone

Note:

The Meridian SL-100 configures the Line (DN) Key as a Directory Number

only.

Feature Card

Message/Call Status/
Incoming Call Indicator

Feature Activation Indicator

Goodbye

Hold

Volume Control Bar

Feature

Line (DN)

553-8966

Summary of Contents for Meridian M3901



















































































































































Search results

Summary of Contents for Meridian M3901

Reviews:

Brands by name

Popular brands

Nortel Meridian M3901, User Manual

Search results

Summary of Contents for Meridian M3901

Reviews:

Brands by name

Popular brands