Nortel Meridian M3901 User Manual Download Page 48

Page: 48 / 146

While you are away from your desk

Forward calls (M3903 and M3904)

The

Call Forward

feature allows you to direct your calls to ring at another Line

(DN). You cannot forward calls while your telephone is ringing.

To forward your calls:

1. Press the

Forward

Key.

The previously stored forward number
appears, if one exists, and the screen
displays

Enter forward number

2. If desired, enter a new number. The

existing number is automatically
deleted. If you make a mistake, use the

Delete

Key to delete the previous

digit(s). Press

Cancel

to leave this

screen without forwarding your
telephone or changing the number.

3. Press the

Done

Key to activate Call

Forward.

To view the number that your calls
are being forwarded to:

1. Press the

Check Forward

Key.

2. Press the

Exit

Key to return to the

previous screen.

This action will leave Call Forward
active.

To cancel Call Forward:

1. Press the

Check Forward

Key.

2. Press the

Cancel Forward

Key.

Forward

Done

CheckFw

Exit

CheckFw

CanclFw

Summary of Contents for Meridian M3901



















































































































































Search results

Summary of Contents for Meridian M3901

Reviews:

Brands by name

Popular brands

Nortel Meridian M3901, User Manual

Search results

Summary of Contents for Meridian M3901

Reviews:

Brands by name

Popular brands