Nortel Meridian M3901 User Manual Download Page 68

Page: 68 / 146

Additional Call Features

Station Camp-on

allows you to transfer an external call to a busy extension.

When the busy extension disconnects from its current call, the transferred call will
ring at the now idle extension.

To activate Station Camp-on after
answering an incoming external
telephone call:

1. Press the

Transfer

Key.

The external party is on hold and you
receive a dial tone. The screen
displays

Call on hold, dial number

Dial

the internal extension number of

the telephone where the call is to be
transferred.

3. On the

M3903

and

M3904

only,

press the

Connect

Key.

Note:

The person you called hears a tone,

and you hear ring/ringback signal or
busy/engaged signal (depending on the
options chosen). The external caller hears
ring/ringback signal or music.

4. Replace the

handset

The external caller is now camped-on
to the number you dialed.

Note 1:

You cannot camp-on to an

extension that has the Call Waiting feature
configured.

Note 2:

If the camped-on call is not

accepted within a specified period of time,
it returns to you or to the Attendant. Contact
you network administrator to determine
where, and after what period of time,
unanswered calls are re-routed

Trans

Connect

Summary of Contents for Meridian M3901



















































































































































Search results

Summary of Contents for Meridian M3901

Reviews:

Brands by name

Popular brands

Nortel Meridian M3901, User Manual

Search results

Summary of Contents for Meridian M3901

Reviews:

Brands by name

Popular brands