Transferring calls
63
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
Your installer programs both the Call Park prefix and the delay before parked calls
are returned to the originating telephone. External calls parked for longer than the
programmed delay are returned to your telephone.
Call Park can be disabled by your installer.
Displays
Tip
Answered Hunt Group calls are parked in the same manner as other calls. For
more information on Hunt Groups see
Programming Hunt Groups
on page
101.
The person you were talking to has already parked your
call. You cannot park the same call.
You have attempted to use Call Park with no active call on
your telephone. If the call you want to park is on hold,
reconnect to it before you park it.
You have entered an invalid retrieval code.
There was no call on the retrieval code you entered.
You have tried to park a conference call. Split the
conference and park the calls separately. The person who
retrieves the calls can reconnect the conference.
Record the code shown. Use Page (
ƒfl‚
) or
press
PAGE
to announce the call and its retrieval code.
All available retrieval codes are in use. Transfer the call or
take a message instead.
For other displays, see
Common feature displays
on page 149.
Already parked
No call to park
Invalid number
No call on: 101
Park denied
Parked on: 402
PAGE
EXIT
Parking full
Summary of Contents for Enterprise Edge
