manualshive.com logo in svg

Nortel BSG12aw 1.0, Configuration Manual

The Nortel BSG12aw 1.0 Configuration Manual is a comprehensive guide, providing step-by-step instructions to set up and optimize your device. This user-friendly manual is available for free download at manualshive.com, ensuring convenient access to the detailed information you need to make the most of your Nortel BSG12aw 1.0.

Share
Download
background image

11

Configuration Guide

Configuration fundamentals

Wide area network

Wide area network (WAN) configuration includes configuring Ethernet ports. For more 
information, see 

WAN configuration (page 15)

 and 

WAN advanced configuration (page 83)

. 

Local area network

Local area network (LAN) configuration includes configuring the virtual interface, Ethernet LAN 
settings, and wireless LAN settings. For more information, see 

VLAN configuration (page 37)

 and 

LAN advanced configuration (page 97)

.

Virtual local area network

Virtual local area network (VLAN) configuration includes configuring basic VLAN settings, 
VLAN port settings, static VLAN, and VLAN Spanning Tree Protocol (STP). For more 
information, see 

VLAN configuration (page 37)

 and 

VLAN advanced configuration (page 111)

.

Wireless network

Wireless network (WLAN) configuration includes configuring the access point, radio, MAC 
filtering, security, and wireless multi media. For more information, see 

Wireless network 

configuration (page 43)

 and 

LAN advanced configuration (page 97)

.

IP routing

IP routing configuration includes configuring routing protocols such as Open Shortest Path First 
(OSPF), Routing Information Protocol (RIP), Route Redistribution (RRD), and Virtual Router 
Redundancy Protocol (VRRP). For more information, see 

IP routing advanced configuration 

(page 127)

.

Dynamic host control protocol

Dynamic Host Control Protocol (DHCP) configuration includes configuring DHCP server and 
DHCP relay settings. For more information, see 

DHCP advanced configuration (page 145)

.

Summary of Contents for BSG12aw 1.0









































































































































































































Reviews:

No comments

Related manuals for BSG12aw 1.0

Lantronix X303 Quick Start Manual preview
X303
Brand: Lantronix Pages: 2
Advantech EKI-1200-CE Series User Manual preview
EKI-1200-CE Series
Brand: Advantech Pages: 67
iTAS PAMSPAN501x User Manual preview
PAMSPAN501x
Brand: iTAS Pages: 109
ZyXEL Communications P-324 User Manual preview
P-324
Brand: ZyXEL Communications Pages: 352
T-Mobile TMO-G4AR User Manual preview
TMO-G4AR
Brand: T-Mobile Pages: 25
Valcom VE8021 Manual preview
VE8021
Brand: Valcom Pages: 4
Bogen MultiVOIP MVP130BG Specifications preview
MultiVOIP MVP130BG
Brand: Bogen Pages: 2
SpectraLink NetLink 150 Technical Bulletin preview
NetLink 150
Brand: SpectraLink Pages: 2
ETC Response SMPTE Setup Manual preview
Response SMPTE
Brand: ETC Pages: 5
TEKTELIC Communications T0004142 User Manual preview
T0004142
Brand: TEKTELIC Communications Pages: 34
daviteq iConnector User Manual preview
iConnector
Brand: daviteq Pages: 14
gefran R-ETM100 Installation And Operation Manual preview
R-ETM100
Brand: gefran Pages: 2
Fanstel BLG840F Manual preview
BLG840F
Brand: Fanstel Pages: 19
Vignet AD802 User Manual preview
AD802
Brand: Vignet Pages: 15
US Robotics USR9108 - U.S. Robotics Wireless MAXg Specifications preview
USR9108 - U.S. Robotics Wireless MAXg
Brand: US Robotics Pages: 2
Symantec 4400 Series Installation Manual preview
4400 Series
Brand: Symantec Pages: 100
Yeastar Technology NeoGate TB400 Manual preview
NeoGate TB400
Brand: Yeastar Technology Pages: 11
ProSoft Technology ICX30-HWC User Manual preview
ICX30-HWC
Brand: ProSoft Technology Pages: 64

Brands by name

Popular brands

Load more brands