Nortel BSG12aw 1.0, Configuration Manual

Page: 106 / 200

106 LAN advanced configuration
NN47928-500 NN47928-500
End
WEP configuration parameters
The following section describes the parameters for advanced configuration of the WEP located at
Configuration,
LAN, Wireless, WEP
tab.
Prerequisites
• To configure WEP settings for an SSID, you must set the Authorization Type of the SSID to
Open or Shared (see
WLAN security configuration parameters (page 105) ).
Cipher Suite Specifies the required pairwise cipher and is used for data encryption. It
consists of an organizationally unique identifier (OUI) (the first 3 octets)
and a cipher suite identifier (the last octet).
Select one of the following options:
• AES-CCMP
• TKIP
• WEP
• AES-CCMP-TKIP
• AES-CCMP-WEP
• TKIP-WEP
• AES-CCMP-TKIP-WEP.
This field is used in conjunction with the Authentication Type. If you select
WPA for Authentication Type, the BSG supports TKIP. If you select
WPA2, the BSG supports AES-COMP and TKIP.
PMK SA Lifetime Type the Pairwise Master Key (PMK) SA (Security Association) Lifetime
value.
This represents the maximum lifetime of a PMK in the PMK cache.
The valid range is 1 to 4294967295.
The default value is 43200.
Variable Value