Nortel BCM50a, Configuration Manual

Page: 98 / 315

98 Chapter 9 Network Address Translation (NAT)
N0115791
Figure 36 Menu 15.1.1.1: Editing or configuring an individual rule in a set
Table 20 describes the fields in Figure 36 .
Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Start=
End = N/A
Global IP:
Start=
End = N/A
Press ENTER to Confirm or ESC to Cancel:
Table 20 Menu 15.1.1.1: Editing or configuring an individual rule in a set
Field Description Example
Type Press [SPACE BAR] and then [ENTER] to select from a total
of five types. If you choose Server , you can specify multiple
servers of different types behind NAT to this computer. See
“Example 3: Multiple public IP addresses with inside servers”
on page 106 for an example.
One-to-On
e
Local IP
Start
Only local IP fields are N/A for server; Global IP fields must be
set for Server .
Enter the starting local IP address (ILA). 0.0.0.0
End Enter the ending local IP address (ILA). If the rule is for all
local IPs, then put the Start IP as 0.0.0.0 and the End IP as
255.255.255.255. This field is N/A for One-to-One and Server
types.
N/A