Nortel BCM50a, Configuration Manual

Page: 254 / 315

254 Appendix G Command Interpreter
N0115791
actionFlags
[act(1-7)]
[enable/disable]
Sets the content filtering customize action
flags.
logFlags
[type(1-3)][enabl
e/disable]
Sets the content filtering customize log flags.
add [string]
[trust/untrust/
keyword]
Adds a trusted Web site, forbidden Web site
or keyword blocking string.
delete [string]
[trust/untrust/
keyword]
Deletes a trusted Web site, forbidden Web
site or keyword blocking string.
reset
Returns to the default configuration.
tredir
failcount <count>
Sets the number of times that the device can
ping the target without a response before
forwarding traffic to the backup gateway.
partner <ipaddr>
Sets the traffic redirect backup gateway IP
address.
target <ipaddr>
Sets the IP address that the device uses to
test WAN accessibility.
timeout <timeout>
Sets the number of seconds the device waits
for a response from the target.
checktime <period>
Sets the number of seconds the device waits
between attempts to connect to the target.
active <on|off>
Enables or disables traffic redirect.
save
Saves traffic redirect configuration.
disp
Displays the traffic redirect configuration.
debug <value>
Sets the traffic redirect debug value.
rpt
active [1:yes|0:no]
Enables or disables the reports.
start
Starts recording reports data.
stop
Stops recording reports data.
url
Records the most visited Web sites.
ip
Records the LAN IP addresses that sent and
received the most traffic.
Table 59 IP commands
Command Description