background image

5

Installing the Nortel Wireless Access Point 7220

FINAL April 8th-2005

ATTENTION: L'usage d'antennes autres que stipulées par le fabricant est prohibé et peut résulter en une violation des 
critères d'approbation FCC et Industrie Canada pour lequel cet appareil est homologué.

General Installation Considerations

This device has been evaluated and found to be compliant to the requirements addressing RF exposure from radio 
frequency devices for an uncontrolled environment. The RF emissions of this device are below the FCC limits. 
However, it is nevertheless generally advisable that radio transmitting equipment should always be installed and used in 
a manner so as to minimise exposure during normal operation.

When the unit is installed using integral 5GHz antennas with integral or external 2.4GHz antennas, the product shall be 
installed in a fixed location with a minimum separation of 0.5 metre from all persons during normal use and shall be 
used only with approved accessories listed in this manual.

When the unit is installed using optional external 5GHz antennas (13 dBi and 18dBi), the product shall be installed in a 
fixed location with a minimum separation of 50 cm from all persons during normal use and shall be used with approved 
accessories listed in this manual. 

When the unit is installed using optional external 5GHz antennas (23 dBi), the product shall be installed in a fixed 
location with a minimum separation of 100 cm from all persons during normal use and shall be used with approved 
accessories listed in this manual. 

Installation with external 5GHz antennas (13 dBi and 18 dBi) are qualified for indoor and outdoor use. The 23 dBi 
antenna is qualified for outdoor use only. This unit operates in point-to-point fashion only in 5GHz band.

Nortel Networks Inc. software license agreement

This Software License Agreement (“License Agreement”) is between you, the end-user (“Customer”) and Nortel 
Networks Corporation and its subsidiaries and affiliates (“Nortel Networks”). PLEASE READ THE FOLLOWING 
CAREFULLY. YOU MUST ACCEPT THESE LICENSE TERMS IN ORDER TO DOWNLOAD AND/OR USE THE 
SOFTWARE. USE OF THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OF THIS LICENSE 
AGREEMENT. If you do not accept these terms and conditions, return the Software, unused and in the original shipping 
container, within 30 days of purchase to obtain a credit for the full purchase price.

“Software” is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or affiliates, and is copyrighted 
and licensed, not sold. Software consists of machine-readable instructions, its components, data, audio-visual content 
(such as images, text, recordings or pictures) and related licensed materials including all whole or partial copies. Nortel 
Networks grants you a license to use the Software only in the country where you acquired the Software. You obtain no 
rights other than those granted to you under this License Agreement. You are responsible for the selection of the 
Software and for the installation of, use of, and results obtained from the Software.

1.

Licensed Use of Software. Nortel Networks grants Customer a nonexclusive license to use a copy of the Software 

on only one machine at any one time or to the extent of the activation or authorized usage level, whichever is applicable. 
Software is not transferable, or applicable, or entitled to third parties on subsequent resale of the equipment. To the 
extent Software is furnished for use with designated hardware or Customer furnished equipment (“CFE”), Customer is 
granted a nonexclusive license to use Software only on such hardware or CFE, as applicable. Software contains trade 
secrets and Customer agrees to treat Software as confidential information using the same care and discretion Customer 
uses with its own similar information that it does not wish to disclose, publish or disseminate. Customer will ensure that 
anyone who uses the Software does so only in compliance with the terms of this Agreement. Customer shall not a) use, 
copy, modify, transfer or distribute the Software except as expressly authorized; b) reverse assemble, reverse compile, 
reverse engineer or otherwise translate the Software; c) create derivative works or modifications unless expressly 
authorized; or d) sublicense, rent or lease the Software. Licensors of intellectual property to Nortel Networks are 
beneficiaries of this provision. Upon termination or breach of the license by Customer or in the event designated 
hardware or CFE is no longer in use, Customer will promptly return the Software to Nortel Networks or certify its 

Summary of Contents for 7220



































Reviews: