11
Installing the Nortel Wireless Access Point 7220
DRAFT March 24th-2005
32
Slip the protective rubber boot the remainder of the way to the base of the
antenna.
Figure 8 Install the protective boots
33
Ensure that the protective boot is firmly in place.
34
Repeat steps
29
to
33
with the second antenna.
Verifying correct operation through the LED indicators
35
If installing a Wireless AP 7220@NAP, run the Ethernet cable to the desired
Ethernet feeder and splice using standard connectors.
36
Apply power to the Wireless AP 7220 unit.
The LED at the bottom of the unit turns red indicating the unit is powering up.
Consult
Table 1
to interpret the different LED states for a standalone Wireless
AP 7220 or
Table 2
to interpret the different LED states for a Wireless AP
7220 @ NAP.
Table 1 Standalone Wireless AP 7220 LED Indicators
LED Pattern
Status
Description
Solid Red
Power-up/Initializing
Basic Services not yet
initialized
Alternating Red/Amber
Initi No Transit Link
Initialized but no Transit Link
Neighbors Detected
Alternating Red/Green
Initi Transit Link
Detected
1 or more neighbors
detected
antenna boot
Summary of Contents for 7220
