194
Switch administration tasks
no ip name-server <ip_address_1>
no ip name-server [<ip_address_2>]
no ip name-server [<ip_address_3>]
Note: To remove all three server addresses, you must enter the
command three times, each with a different server address.
"no ip name-server parameters" (page 194)
outlines the parameters for
this command.
no ip name-server parameters
Parameter
Description
<ip_address_1>
The IP address of the domain name server to
remove.
<ip_address_2>
Optional. The IP address of a domain name
server to remove from the list of servers used
by the switch.
<ip_address_3>
Optional. The IP address of a domain name
server to remove from the list of servers used
by the switch.
Run this command in Global Configuration command mode.
General Switch Administration using the Web-based Management
Interface
This section contains the following topics:
•
"Viewing stack information" (page 194)
•
"Viewing summary switch information" (page 196)
•
"Changing stack numbering" (page 197)
•
"Identifying unit numbers" (page 199)
•
"Configuring BootP, IP, and gateway settings" (page 200)
•
"Modifying system settings" (page 203)
•
"Managing remote access by IP address" (page 205)
•
Configuring the Real-Time Clock
Viewing stack information
Note: The Embedded Web Server automatically detects the operational
mode of your system. If the system is in stand-alone mode, the Stack
Information page option is not listed in the menu.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500
02.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.