General Switch Administration using the Web-based Management Interface
197
The following table
"Switch Information page fields" (page 197)
describes the fields on the Switch Information screen.
Switch Information page fields
Item
Description
Unit, if in a stack
configuration
Select the number of the device on which to view summary
information. The page is updated with information about the selected
switch. For more information about stack numbering, see
.
Pluggable Port
Indicates the presence of an SFP. Fields are present and numbered
as appropriate to the switch model.
Module Description
The factory set description of the policy switch.
Firmware Version
The version of the running firmware.
Software Version
The version of the running software.
Manufacturing Date Code
The date of manufacture of the board in ASCII format.
Hardware Version
The hardware version of the switch.
Serial Number
The serial number of the policy switch.
Operational State
The current operational state of the device. The operational states
are Other, Not Available, Removed, Disabled, Normal, Reset in
Progress, Testing, Warning, Non Fatal Errors, Fatal Error, and Not
Configured.
Power Status
The current power status of the device
•
Primary Power. RPS not present
•
Primary Power. RPS present
•
Redundant Power. Primary power failed
•
Unavailable
Fans Status
The current status of switch cooling fans.
2
In stacked configurations, click the number of the device to view in
the upper-left corner of the screen.
—End—
Changing stack numbering
If the system is in a stack, you can view and renumber existing stack
numbering information.
Note: The unit number does not affect the base unit designation.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500
02.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.
