Nortel 2332 Series Installation Manual Download Page 3 | Manualshive

Page: 3 / 144

Nortel 2332 Series Installation Manual Download Page 3

3

Nortel WLAN Series 2332 Access Point Installation Guide

In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains
restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third
parties).

Legal information

This section includes the following legal information:

•

“Limited product warranty” on page 3

•

“Nortel Networks software license agreement” on page 5

•

“SSH source code statement” on page 6

•

“OpenSSL project license statements” on page 6

•

“Trademarks” on page 2

Limited product warranty

The following sections describe the Nortel standard Product Warranty for End Users.

Products

WLAN—Security Switch 2300 Series

WLAN—Series 2332 Access Points

Nortel WLAN Location Engine 2340

Limited warranty

Nortel standard warranty for hardware is one (1) year. Nortel warrants software materials to be defect free for
90 Days from time of purchase. Nortel requires purchasing the software subscription if a customer would like
to receive new WLAN—Security Switch 2300 Series, Nortel WLAN — Management System software. This
limited warranty extends only to you the original purchaser of the Product.

Exclusive remedy

Your sole remedy under the limited warranty described above is, at Nortel’s sole option and expense, the
repair or replacement of the non-conforming Product or refund of the purchase price of the non-conforming
Products. Nortel’s obligation under this limited warranty is subject to compliance with Nortel’s then-current
Return Material Authorization (“RMA”) procedures. All replaced Products will become the property of
Nortel. Exchange Products not returned to Nortel will be invoiced at full Product list prices. Replacement
Products may be new, reconditioned or contain refurbished materials. In connection with any warranty
services hereunder, Nortel may in its sole discretion modify the Product at no cost to you to improve its reli-
ability or performance.

Warranty claim procedures

Should a Product fail to conform to the limited warranty during the applicable warranty period as described
above, Nortel must be notified during the applicable warranty period in order to have any obligation under the
limited warranty.

«
1
2
3
4
5
...
»

Summary of Contents for 2332 Series

















































































































































Reviews:

No comments