manualshive.com logo in svg

Nortel 2332 Series, Installation Manual, Page: 130 / 144

Share
Download
Nortel 2332 Series Installation Manual Download Page 130

130

AP technical specifications

NN47250-307 (324136-A Version 01.03)

Table 10: MAC Address Allocations on a Series 2332 access point

AP base MAC Address

•

The AP has a base MAC address. All the other addresses are assigned based 
on this address. 

Ethernet Port MAC 
Addresses

•

Ethernet port 1 equals the AP base MAC address.

•

Ethernet port 2 equals the AP base MAC a 1.

802.11a Radio and 
SSID MAC Addresses

•

The 802.11a radio equals the AP base MAC a 1.

•

The BSSIDs for the SSIDs configured on the 802.11a radio end in odd 
numbers. The first BSSID is equal to the AP’s base MAC a 1. The 
next BSSID is equal to the AP’s base MAC a 3, and so on. 

802.11b/g Radio and 
SSID MAC Addresses

•

The 802.11b/g radio equals the AP base MAC address. 

•

The BSSIDs for the SSIDs configured on the 802.11b/g radio end in even 
numbers. The first BSSID is equal to the AP’s base MAC address. The next 
BSSID is equal to the AP’s base MAC a 2, and so on. 

Summary of Contents for 2332 Series

















































































































































Reviews:

No comments