Nortel 2332 Series Installation Manual Download Page 21 | Manualshive

Page: 21 / 144

background image

21

Nortel WLAN Series 2332 Access Point Installation Guide

Introducing the Nortel WLAN 2332
Series System

This guide shows you how to install a Nortel Access Point (AP) in a Nortel WLAN 2332 Series System.

Read this guide if you are a network administrator or other person installing an AP in a network.

Nortel WLAN 2332 Series System

The Nortel WLAN 2332 Series System is an enterprise-class WLAN solution that seamlessly integrates with an existing
wired enterprise network. The Nortel system provides secure connectivity to both wireless and wired users in large envi-
ronments such as office buildings, hospitals, and university campuses.

The Nortel WLAN 2332 Series System fulfills the three fundamental requirements of an enterprise WLAN: It eliminates
the distinction between wired and wireless networks, allows users to work safely from anywhere (

secure mobility

), and

provides a comprehensive suite of intuitive tools for planning and managing the network before and after deployment,
greatly easing the operational burden on IT resources.

The Nortel WLAN 2332 Series System consists of the following components:

•

WLAN Management Software tool suite

—A full-featured graphical user interface (GUI) client application used

to plan, configure, and deploy a WLAN and manage the users. It also provides a centralized service application for
the WLAN to allow for user monitoring, reporting, and diagnostics

•

One or more WLAN—Security Switches (WSSs)

—Distributed, intelligent machines for managing user

connectivity, connecting and powering Access Points (APs), and connecting the WLAN to the wired network
backbone

•

Multiple Access Point (AP)

—Wireless access points that transmit and receive radio frequency (RF) signals to and

from wireless users and connect them to a WSS

•

WLAN 2300 System Software (WSS Software)

—The operating system that controls all WSSs and APs in a

WLAN. It is accessible through a command-line interface (CLI), or the WLAN Management Software GUI

Nortel WLAN 2332 Series System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Note.

For a complete listing of the access point models in the WLAN Series 2332 and their

respective countries of operation, please visit:

http://www.nortel.com/support

.

All models of the 2332 access point have been region-locked to meet geographic regulatory
restrictions. Each model is associated to a specific regulatory domain and subsequent country of
operation. During installation, the access point model and wireless security switch regulatory
domain must match or the access point will not operate.

«
...
19
20
21
22
23
...
»

Summary of Contents for 2332 Series

















































































































































Reviews:

No comments

Related manuals for 2332 Series

Brand: D-Link Pages: 3

Brand: D-Link Pages: 12

Brand: NetComm Wireless Pages: 2

Brand: Hirschmann Pages: 42

Brand: Airlink101 Pages: 40

Brand: NODEXON Pages: 26

Brand: NETGEAR Pages: 2

Brand: Technicolor Pages: 61

Brand: Monoprice Pages: 74

Brand: Comcast Pages: 13

Brand: Redpine Signals Pages: 146

Brand: 4IPNET Pages: 18

Brand: Barricade Pages: 21

Ibex-RT-610 Series

Brand: Westermo Pages: 30

Brand: UAT Pages: 24

Edge Point EP-R8

Brand: Ubiquiti Pages: 36

Brand: Draytek Pages: 235

Brand: H3C Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands