6
Contents
Testing an ISDN BRI trunk
103
Removing the test setup
103
Generating traffic reports
105
Contents
105
Introduction
105
Procedures
Procedure 1
Selecting the card slots
16
Procedure 2
Remove the module cover for card installation
20
Procedure 3
Installing the MISP
21
Procedure 4
Removing the MISP
21
Procedure 5
Installing the BRSC, SILC, and UILC
22
Procedure 6
Remove the BRSC, SILC, and UILC
23
Procedure 7
Connecting ISDN BRI terminals to the system
23
Procedure 8
Connect the modules to the MDF
24
Procedure 9
Cross-connecting SILC and/or UILC ports to the building
wiring
29
Procedure 10
Connecting the ISDN BRI terminals to the DSL
36
Procedure 11
Providing clock referencing on the SILC
39
Procedure 12
Connecting clock reference cables
41
Procedure 13
Performing acceptance testing
48
Procedure 14
Selecting the card slots
58
Procedure 15
Installing the MISP
59
Procedure 16
Removing the MISP
60
Procedure 17
Installing the SILCs and UILCs
61
Procedure 18
Removing the SILC and UILC
64
Procedure 19
Installing the PRI hardware
64
Procedure 20
Connecting system cables to the cross-connect terminal
66
Procedure 21
Cross-connecting the DSLs at the cross-connect terminal
70
Procedure 22
Connecting the terminating resistor to the SILC DSL
74
Procedure 23
Connecting the ISDN BRI terminals to the DSL
76
Procedure 24
Initializing a Nortel Networks M5317TDX terminal
80
Procedure 25
Connecting the system cables to the cross-connect
terminal
82
Procedure 26
Cross-connecting DSLs at the cross-connect terminal
83
Procedure 27
Performing a call hold test
88
Procedure 28
Perform a Call Waiting test
89
Procedure 29
Performing a Call Forward No Answer test
91
Procedure 30
Perform a Calling Line Identification Presentation test
92
Procedure 31
Perform an ISDN BRI Conference test
93
Procedure 32
Perform a Call Join test on Conference
94
Procedure 33
Perform a hunting test
96
Procedure 34
Perform an ISDN BRI NI-1 Call Forward All Calls test
97
Procedure 35
Perform an ISDN BRI ETSI Call Forwarding Unconditional
test
98
Procedure 36
Perform a circuit-switched data call test
99
Procedure 37
Perform a B-channel packet data transmission test using an
external packet handler
100
Procedure 38
Perform a D-channel packet data transmission test using an
external packet handler
101
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003-2007, Nortel Networks
.
Summary of Contents for 1000 Con?guration guide
Page 107: ......