background image

 www.nortekcontrol.com
All rights reserved. ©2019 Nortek Security & Control.

P/N: 10022523  (Rev D)

LIMITED WARRANTY

Nortek Security & Control ( ‘NSC’ ) warrants the ITP-8 to be free from defects in materials 
and workmanship for the period of two years (2 years) from the date of purchase. If within the 
applicable warranty period above purchaser discovers that such item was not as warranted 
above and promptly notifies ‘NSC’ in writing, ‘NSC’ shall repair or replace the item at the 
company’s option. This warranty shall not apply (a) to equipment not manufactured by ‘NSC’, 
(b) to equipment which shall have been installed by other than an ‘NSC’ authorized installer, 
(c) to installed equipment which is not installed to ‘NSC’s’ specifications, (d) to equipment 
which shall have been repaired or altered by others than ‘NSC’, (e) to equipment which shall 
have been subjected to negligence, accident, or damage by circumstances beyond ‘NSC’s’ 
control, including, but not limited to, lightning, flood, electrical surge, tornado, earthquake, 
or other catastrophic events beyond ‘NSC’s’ control, or to improper operation, maintenance 
or storage, or to other than normal use of service. With respect to equipment sold by, but not 
manufactured by ‘NSC’, the warranty obligations of ‘NSC’ shall in all respects conform to the 
warranty actually extended to ‘NSC’ by its supplier. The foregoing warranties do not cover 
reimbursement for labor, transportation, removal, installation or other expenses which may be 
incurred in connection with repair or replacement. Except as may be expressly provided and 
authorized in writing by ‘NSC’, ‘NSC’ shall not be subject to any other obligations or liabilities 
whatsoever with respect to equipment manufactured by ‘NSC’ or services rendered by ‘NSC’. 

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED 
AND IMPLIED WARRANTIES EXCEPT WARRANTIES OF TITLE, INCLUDING BUT NOT LIMITED 
TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. 

ATTENTION: TO OUR VALUED CUSTOMERS 

To ensure that customers obtain quality pre-sale and after-sale support and service, 
Nortek Security & Control products are sold exclusively through authorized dealers. 
Nortek Security & Control products are not sold online. 

The warranties on Nortek Security & Control products are NOT VALID if the products 
have been purchased from an unauthorized dealer or an online E-tailer. To determine 
if your Nortek Security & Control reseller is authorized, please call Nortek Security  
& Control at (707) 283-5900.

Summary of Contents for ITP-8

















Reviews: