ITP-8
13
3
Startup Settings
After applying power to the ITP-8, un-check the Auto Start check-box then
tap the Configure button.
From here, you will see the Startup options:
a. Configure WiFi
To use WiFi, check the Enable WiFi box, select the SSID and enter the
password.
b. Orientation Setup
Configure whether the panel will be installed in portrait or landscape mode.
Note:
The ITP-8 is optimized for use in landscape mode.
c. Camera Enable / Disable
The ITP-8 camera can be enable or disabled. When disabled, the panel
will not transmit video but can still be used for face recognition.
d. Proximity Sensor Sensitivity
Adjust the sensitivity of the proximity sensor for waking up the panel.
e. Controller Binding
If more than one controller is used on the same network, specify which
controller the ITP-8 should be assigned to.
