QUICK INSTALL GUIDE
12
2
Powering up the ITP-8
Apply power (12V DC or PoE) and wait for the unit to boot up.
If connected to a wired Ethernet switch the ITP-8 will acquire a network
address via DHCP and automatically connect to the system.
If the ITP-8 does not detect a wired Ethernet connection and the WiFi radio
has not been configured, you will need to set up the wireless connection.
In the setup menu select the wireless connection and follow the on screen
instructions to set up the wireless connection. For wireless setup, see
Section 3 - Startup Settings.
Power
Power
Rear View
Front View
