Language Controls
This field allows the user to select the menu language of choice (English, French, German)
Here the user can select the language of choice for the menu displays. To set the language, highlight the
selection then enter the user code (0335). Press enter. Use the UP/DOWN arrows to select the choice (English,
French, German). Pressing enter saves the setting and returns the user to the previous menu.
NOTE: ONLY ENGLISH AVAILABLE AS OF 05/03
Water Management
This section allows the user to set time based parameters and adjust water control parameters.
FTBD Hours
This section allows the user to set the frequency of full tank blowdowns (FTBD). FTBD’s drains and re-fills the
entire contents of the humidifier after a preset accumulated operating time. Run time is measured in steam hours
(weighted run time hours), and can be adjusted from 0 hours (feature off) to 400 hours in 25 hour increments.
Once the FTBD time has expired, the controller will wait until the FTBD hour to initiate the cycle. This prevents
random drains at times when they would be inconvenient.
SELECT LANGUAGE
ENGLISH
FRENCH
GERMAN
SELECT LANGUAGE
ENGLISH
FRENCH
GERMAN
DATE/TIME/UNITS
LANGUAGE CONTROLS
WATER MANAGEMENT
CONTROL TYPE
CAPACITY LIMIT
CALIBRATE
FTBD HOURS
CHANGE HOURS? XXX
DATE/TIME/UNITS
FTBD HOURS
XXX
FTBD HOUR
XX
BLOWDOWN RATE
XX%
FLOAT CHECK
HH:MM
FILL CORRCTN
XX%
DRAIN CORRCTN
XX%
DRAIN COOL:
SMART
LANGUAGE CONTROLS
WATER MANAGEMENT
CONTROL TYPE
CAPACITY LIMIT
CALIBRATE
0335
FTBD HOUR
CHANGE HOUR? XXX
DATE/TIME/UNITS
FTBD HOURS
XXX
FTBD HOUR
XX
BLOWDOWN RATE
XX%
FLOAT CHECK
HH:MM
FILL CORRCTN
XX%
DRAIN CORRCTN
XX%
DRAIN COOL:
ON
LANGUAGE CONTROLS
WATER MANAGEMENT
CONTROL TYPE
CAPACITY LIMIT
CALIBRATE
0335
- 56 -
