Nortec AF-22
52002_A_EN_1611
5
3
Product Overview
3.1
AF-22
System description
The system mainly consists of atomization of water supplied into the air. All system components are
integrated into a plastic housing. The atomizing nozzles are assembled firmly onto the upper part of the
housing. In addition, every device is fitted with a hygrostat which measures the relative humidity
(indicated in percent RH - %) in the ambient air. It compares the measured value with the pre-selected
set point and thus controls the device.
Individual smaller rooms or large halls can be humidified, depending on the quantity of water that is
available and the length of the hoses. The atomizers are designed for wall mounting and are delivered
ready for connection.
Table 1: Technical Specification Overview
Designation Number of nozzles
Max. humidifying capacity
at an atomizing pressure of 5 bar)
AF-22
2
22 lbs/hr (10 l/h)
The AF-22 is a two-component atomizer. That means that it needs both water and compressed air for
atomizing.
Figure 1: Typical setup of the system (illustration shows the AF-22)