NORSK KLEBER Kube 3 Installation, Assembly And Operating Manual Download Page 35

Page: 35 / 35

Exclusions

1. Exclusions to this Warranty include: injury, loss of

use, damage, failure to function due to accident,

negligence, misuse, improper installation, altera-

tion or adjustment of the manufacturer’s settings

of components, lack of proper and regular mainte-

nance, damage incurred while the appliance is in

transit, alteration, or act of God.

2. This 5 Year warranty excludes damage caused by

normal wear and tear, such as stone discoloration

or chipping, worn or torn gaskets. Also excluded is

damage to the appliance caused by abuse, improper

installation, modification of the appliance, or the

use of fuel other than that for which the appliance

is configured (use cord wood only).

3. Norsk Kleber and its U.S. importer Hestia Indus-

tries is free of liability for any damages caused by

the appliance, as well as inconvenience expenses

and materials. Incidental or consequential damages

are not covered by this warranty. In some states,

the exclusion of incidental or consequential dam-

age may not apply.

4. This warranty does not cover any loss or damage

incurred by the use or removal of any component

or apparatus to or from the Norsk Kleber without

the express written permission of Norsk Kleber or

its U.S. importer, Hestia Industries. This warranty

does not cover a stove repaired by someone other

than a Norsk Kleber authorized dealer and is not

part of this 5 year warranty.

5. This warranty is automatically voided if the appli-

ance’s serial number has been removed or altered

in any way. If the appliance is used for commercial

purposes, it is excluded from this warranty.

6. No dealer, distributor, or similar person has the

authority to represent or warrant Norsk Kleber

products beyond the terms contained within this

warranty. Norsk Kleber assumes no liability for

such warranties or representations.

7. If for any reason any section of this warranty is de-

clared invalid, the balance of the warranty remains

in effect and all other clauses shall remain in effect.

8. This 5 year warranty is the only warranty sup-

plied by Norsk Kleber., the manufacturer of the

appliance. All other warranties, whether express

or implied, are hereby expressly disclaimed and

purchaser’s recourse is expressly limited to the

warranties set forth herein.

IF WARRANTY SERVICE IS NEEDED:

1. If you discover a problem that you believe is

covered by this warranty, you MUST REPORT it

to your Norsk Kleber dealer WITHIN 30 DAYS,

giving them proof of purchase, the purchase date,

and the model name and serial number.

2. Norsk Kleber has the option of either repairing or

replacing the defective component.

3. If your dealer is unable to repair your soapstone

stove defect, he may process a warranty claim

through Norsk Kleber, including the name of the

dealership where you purchased the appliance,

a copy of your receipt showing the date of the

stoves purchase, and the serial number on your

stove.

4. Check with your dealer in advance for any costs

to you when arranging a warranty call. Mileage or

service charges are not covered by this warranty.

This charge can vary from store to store.

5. Any appliance or part thereof that is repaired or

replaced during the limited warranty period will

be warranted under the terms of the limited war-

ranty for a period not to exceed the remaining

term of the original limited warranty or three (3)

months, whichever is longer.

Summary of Contents for Kube 3




































Search results

Summary of Contents for Kube 3

Reviews:

Related manuals for Kube 3

Brands by name

Popular brands

NORSK KLEBER Kube 3, Installation, Assembly And Operating Manual

Search results

Summary of Contents for Kube 3

Reviews:

Related manuals for Kube 3

Brands by name

Popular brands