1. Set the rear wall with the smoke hood in place.
2. Assemble and hang the heat shield in position and complete the mounting of the flue.
3. Place the side stones with the smallest distance to the holes for steel dowels facing down.
4. Fit the front stone.
5. Set the 15mm 2-part steel ring in place.
6. Insert (4) 26cm metal strips, down into the vertical tracks between the stones.
7. Put 2 steel dowels into each side stone.
8. Set in place the horizontal smoke direction plate H2 down onto steel dowels and next to
the rear wall, with the opening facing forwards.
Screw fastening brackets into the metal
heat shield
Removed for optional rear flue
installation
2- part steel ring assembly
Step 9
Step 10
1. Place the middle labyrinth plate at an 8.5cm
distance to the front edge of
H2
.
2. Position the two labyrinth bricks as shown in
fig. 15
.
3. Set the top plate in place.
H2
Fig. 13
Fig. 14
Fig. 15
Summary of Contents for Kube 3
Page 17: ...Exploded view ...
Page 28: ...Exploded Parts View ...
