SK90
© NØRSE
3
© NØRSE
English
Quick Start Guide
The following steps describe the quickest method to get your pressure washer up and
running. However, it is essential you fully read this manual to ensure you are familiar with
the general safety features, precautions and functions necessary to operate the product.
Failure to do so may result in injury and damage to your washer or personal items.
Connect the other end of
the hose to the spray gun by
inserting next to the trigger. By
pulling slightly on the hose, it will
lock into the spray gun.
On
This high pressure washer
has built-in accessory
compartments. To assemble,
place handle into top of unit
and push forward to lock place.
Secure with included screw.
Install the quick connector filter
and the quick hose connector.
Attach the quick connector filter
by screwing it into the water
inlet of the power washer.
Connect one end of the high
pressure hose to the unit by
inserting it into front right side,
by pulling slightly on the hose it
will lock into the unit. The hose
is now securely attached.
Screw the quick hose connector
on to your garden hose and slide
onto the quick connector filter, it
will “click” into place.
Quick
connector
filter
Pump
Quick hose
connector
hose
Insert the extension lance into
the end of the spray gun by
pushing together and turning
clockwise at the same time.
Insert the fixed spray nozzle into
the end of the extension lance
by pressing the blue button on
the end of the extension lance,
then press the fixed spray nozzle
into the extension lance and turn
clockwise until it “clicks into
place.
