Noritz N-084M-CA, Owner'S Manual And Installation Manual

Page: 40 / 134

40
6.
Installation Clearances
Before installing, check for the following:
Install in accordance with relevant building and mechanical codes, as well as any local, state
or national regulations.
Item
Required Clearances
From Heater
• Maintain the following clearance from
both combustible and non-combustible
materials.
Check Illustration
Caution
305mm (12" Indoor )
914mm (36" Outdoor)
610mm
(24" Outdoor)
102mm
(4" Indoor)
50mm(2" Indoor)
610mm(24" Outdoor)
• If possible, leave203mm( 8") or more on
either side of the unit to facilitate inspec-
tion.
• If possible, leave 610mm(24") or more in
front of the unit to facilitate maintenance
and service if necessary.
Securing of space for
repair/inspection
610mm
(24") or
more
203mm
(8") or
more
203mm
(8") or
more
Min:76mm (3")
Min:76mm (3")
• If the unit will be installed in the vicinity of a
permanent kitchen range or stove that has
the possibility of generating steam that
contains fats or oils, use a dividing plate or
other measure to ensure that the unit is not
exposed to air containing such impurities.
* The dividing plate should be of noncombust-
ible material of a width greater than the
water heater.
Exhaust hood
Range
Dividing plate
Water
heater
(unit: inch)
Cooking Equipment
N084M(35̲45)̲e.p65
05.11.28, 4:15 PM Page 40
Adobe PageMaker 6.5J/PPC