background image

22

Noritz America Corporation   

LIMITED WARRANTY - TANKLESS WATER HEATERS

1. What is Covered by this Warranty

 During the applicable Warranty Period (specified below), Noritz America Corporation (“Noritz“) 

warrants to the original purchaser (“Buyer”) that the new Noritz gas water heater in the originally installed location (“Product”) is 

free from material defects in material or workmanship (the “Warranty”). There are different Warranty Periods for different 

components of the Product, as described below. This Warranty is for the benefit of the original Buyer only and terminates upon 

transfer of the Product from the original Buyer to any other person or entity. For this Warranty to be effective (i) the Product must 

be installed by a method recognized and authorized by Noritz and in compliance with Noritz published materials specifically 

indicated in writing to be applicable to the type and model number of the Product and in compliance with instructions in the 

Installation Manual and Owner’s Guide, which are included with the Product (“Proper Installation”); and (ii) Buyer must use the 

Product in compliance with instructions in the Installation Manual and Owner’s Guide, which are included with the Product.

2. Warranty Period

 This Warranty is provided by Noritz to the Buyer for the duration of the applicable Warranty Period for the 

particular component of the Product as specified below. This Warranty takes effect (“Warranty Effective Date”) on the date of 

Proper Installation of the Product, or 30 days after the date of purchase of the Product, whichever occurs first, and is effective until 

the expiration of the “Warranty Period” for the particular Product component as shown below. The date of Proper Installation must 

be provided to Noritz as well as a copy of the original receipt for the purchase of the Product to establish the Warranty Effective 

Date. For example, when the Product is installed in new single-family residential construction, the Warranty Effective Date is the 

date upon which the Buyer takes title to the real property (e.g., the date of recordation of the deed conveying title to Buyer).

Parts other than Heat Exchanger

Reasonable labor [10]

5 years

1 year

All Products

[1]   An aquastat is the minimum pump control requirement in order to 

maintain the full recirculation warranty. Point of use or “on demand” 

recirculation systems which are thermally controlled (i.e. aquastat) 

also classify as controlled systems.

[2]   25 years or 15,000 operational (burn) hours, whichever occurs first.

[3]   15 years or 12,000 operational (burn) hours, whichever occurs first.

[4]   8 years or 12,500 operational (burn) hours, whichever occurs first.

[5]   12 years or 6,500 operational (burn) hours, whichever occurs first.

[6]   3 years or 4,000 operational (burn) hours, whichever occurs first.

Footnote:

[7]   Provided that temperature is ≤140°F. If temperature is >140°F, then 

applicable Warranty Period is the one used for a commercial capacity 

(Condition C above).

[8]   10 years or 12,500 operational (burn) hours, whichever occurs first.

[9]   5 years or 6,500 operational (burn) hours, whichever occurs first.

[10] A reasonable labor rate will be paid by Noritz to service/repair 

professional on Noritz-approved Warranty repairs, subject to Noritz’s 

schedule of approved labor allowances.

Warranty Period for Heat Exchanger

Warranty Period for Parts and Labor

25 years [2]

15 years [3]

8 years [4]

8 years [4]

EZ98, EZ111, EZTR50 and 

EZTR75 (excluding EZTR40)

15 years [3]

NRCR92 and NRCR111

C) Used in a commercial capacity; 

used in other than a single family 

dwelling; supplied with pre-heated 

water or used in conjunction with 

uncontrolled recirculation

B) Used in conjunction with a 

controlled recirculation 

system[1] installed in accordance 

with the installation manual in a 

single family dwelling

A) Used in a single 

family dwelling

3 years [6]

10 years [8]

5 years [9]

3 years [6]

12 years [5]

15 years [3] [7]

12 years

12 years

25 years [2] [7]

12 years [7]

12 years [5] [7]

Product

Residential Products with prefix 

“NR” 180,000 btu and higher
Residential Products with prefix “NR” 

157,000 btu and lower, and EZTR40
NCC199CDV

Commercial Products with 

prefix “NC” except NCC199CDV

Conditions

3. How do I Use this Warranty?

 If Buyer discovers, within the applicable Warranty Period, a defect in material or workmanship 

(“Defect”), Buyer must promptly notify Noritz or its authorized representative. Please notify Noritz by contacting Noritz’s Customer 

Care at [email protected], or by writing to Noritz Customer Care at 11160 Grace Avenue, Fountain Valley, CA 92708, or by calling 

Noritz Customer Care at 866-766-7489. Buyer must provide evidence of the Warranty Effective Date (See Section 2 above). Within a 

reasonable time after Noritz receives such notification, Noritz will ship at Noritz’s expense, either new or used/refurbished 

replacement parts to correct a Noritz-confirmed Defect. Buyer is responsible for any other costs, including but not limited to labor 

for servicing or replacing the part or Product (except to the extent that labor is covered as described in the Warranty Period section 

above), costs for permits or materials necessary for the repair or replacement, or incidental costs resulting from damage external to 

the Product resulting from the Defect. The replacement component or Product will be warranted only for the unexpired portion of 

the original component's applicable Warranty Period. If during the applicable Warranty Period, the Noritz-provided new or used 

replacement parts, when properly installed, do not correct the Defect, or if Noritz is unable to correct the Defect after a reasonable 

number of attempts, Noritz will provide, at its option, one of the following: (i) a replacement new or used/refurbished Product (at 

Noritz’s option, either the same, comparable or better model), to be shipped at Noritz’s expense, or (ii) a full refund of the purchase 

price paid for the Product (excluding labor or installation costs). These remedies are the Buyer’s only remedies for breach of 

Warranty.

Warranty

Summary of Contents for EZ111

























Reviews: