33
Setting the Control Panel
Chapter 4. – Installation
Screen Display
Operation
Description
Internal Recirculation Mode
Internal recirculation system is operated during [1:RC]
mode turned on.
External Recirculation Mode
External recirculation system is operated during [1:RC]
mode turned on.
[2:RM]
function can
be selected only
after activating the
[1:RC] function.
Setting the Control Panel. (Recirculation system)
To set the recirculation type (External or Internal mode)
1. Turn off the power to the control panel. Press and hold the
‘Function Button’ for approximately 5 seconds to get into the
‘Installer mode’.
2. Turn the dial button in ‘Installer mode’ to ‘[1:RC]’.
3. ‘oFF’ character is flashed when the dial button is pressed.
(Default setting is ‘oFF’ and recirculation function is turned off.)
4. Turn the dial button clockwise to select ‘on’ in order to activate
the recirculation function.
5. Press the dial button to store the current setting and return
back to ‘Installer mode’.
6. Locate ‘[2:RM]’ by turning the dial button clockwise by one
click.
7. Press the dial button when the flashing [2:RM].
8. Turn the dial button to select [Etnl] ‘External Recirculation
Mode’ or [Itnl] ‘Internal Recirculation Mode’.
Summary of Contents for Eco TOUGH NRCP111-DV-LP
Page 42: ...42 Memo ...
Page 43: ...43 Memo ...
