Noritsu LS-600, Starting Manual

Page: 79 / 94

6.3 Monthly Checks
6 ñ 11
6.
D
a
ily
m
ai
n
te
n
an
ce
6.
Close the side cover (left) and front cover.
If cleaning each roller of the film advance unit and film path, it is not necessary to close the side cover (left) and
front cover.
This completes cleaning the 135 rewinding unit.
6.3.3 Cleaning each roller and the film path of the film feed unit
Conditions
Perform this maintenance operation with the power on.
Requirements
ï Firmly-squeezed damp cloth
I
MPORTANT
ï If you clean each roller and the film path, do not use thinner, alcohol or other solvents.
ï After wiping each part using firmly-squeezed damp cloth, completely dry the parts. Do not insert film unless
the cleaned parts are completely dry.
1.
Select the 240 lane of the film feed unit.
I
MPORTANT
ï If the 135 lane of the film advance unit is selected, it is necessary to select the 240 lane by following
the procedure below. If the 135 lane is selected, the film advance top cover cannot be opened fully.
(1)
Slightly open the front cover, then close it.
N
OTE
ï Closing the front cover selects the 240 lane of the film feed unit.
2.
Open the front cover and side cover (left).
Front cover
G088421
Side cover (left)
Front cover
G087613