5.4 Scanning 135-type film
5 ñ 12
4.
Click
Scan
.
5.
Put on clean gloves.
6.
If you have the film cleaner (option), pass the film through the film cleaner.
Dust can be removed from the film by passing the film through the optional film cleaner.
Example:
7.
Insert the film into the film catcher.
Face the surface of the film up so that the images and the frame numbers can be seen correctly. Then, insert the film
from the largest frame number.
The 135 film is fed into the film feed unit and the scanning process starts.
After scanning finishes, the
Judgement Display
is shown. The
Judgement Display
is shown only when
PJP
is
selected in
PJP/AUTO Switch
on the
Correction
tab of the
Environment
display.
For details about the
Judgement Display
, see
4.1 Configuring color and density settings in the Operator's
Manual.
S5200-00-UM01
Film cleaner
G088496
Face the surface of the film up so that
the images and the frame numbers
can be seen properly, and insert the
film from the larger frame number.
Film catcher
G082939
Summary of Contents for LS-600
