18/23
Insert the mixer into its seating following the steps
described in paragraph 7.3 in inverse order.
7.8.1. Assembling the bowl
To assemble the tap, carry out in reverse all of the
disassembly steps illustrated previously(Fig.32 to Fig.27).
To fit the level(F) push the rod (D) from the inside until
the guides protrude; the insert the level(F) and slowly
release the rod(D).
7.8.3 Fitting the tap
To fit the lap correctly back in place proceed as follows;
. hold down the button, making sure that the road is
completely extracted;
.introduce the tap into the seat provide and push until
the pushbutton returns to its initial position.
7.9. Internal sanitization
Warning the thermostat must be set to-OFF
Carry out the following steps:
. prepare the sanitizing solution (see paragraph 7.7)
. fill the bowl with the sanitizing solution;
.leave the solution to act for about 30mins;
.empty out the sanitizing solution from the bowl;
Then rinse out the bowl and inside surfaces thoroughly
to eliminate all residues of sanitizing solution.
7.10. Cleaning the drip tray
The drip tray should be emptied and cleaned daily.
Note: the tray needs to be emptied out and cleaned
every time that the red float fitted to the grid rises, this is
to stop liquid from leaking out.
Lift the tray with grid and pull it outwards to remove it
from its seating.
