14/23
·
Slide the mixing auger upwards with one hand, taking
care to grip it by the rotation pin;
·
Place the bowl on a flat surface and using both hands,
remove the gasket by sliding it upwards in the direction
shown by the arrow.
7.4. Removing the tap
Removing the tap is prohibited if the bowl contains the
product or any other liquid.
To remove the tap, proceed as follows:
·
move the rod to the maximum dispensing position;
·
press the button(A) securing the tap to the machine and
then remove the tap(B) with both hands, as illustrated in
the figures;
7.5. Cleaning the pan
It is necessary to remove all parts fitted to the pan.
·
Remove any product left in the bowl, see paragraph
7.2;
·
Remove the bowl from the machine, see paragraph
7.3;
·
Remove the tap from the machine, see paragraph
7.4;
·
Clean the entire surface of the pan using a damp
cloth and/or a non-abrasive sponge;
·
Clean the channel connecting the bowl and the tap,
using a cleaning brush, as illustrated in the figure;
