TCF Fellbach (2021).04
03/21
VP60 Analogue / IO-Link
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
2. Liability
Physical modifications to the VP60 proportional valve may only be carried out by the manufacturer. If the valve requires repairs
or maintenance beyond the activities described in these instructions, this work may only be carried out by the manufacturer of
the proportional valve or by persons expressly authorised and trained by the manufacturer. Failure to comply with the above
provisions will invalidate the warranty claims. The manufacturer accepts no liability for any damage incurred.
Caution!
This product is for use in industrial compressed air systems only. It is to be used where the pressure and temperature ratings
listed in the data sheet are not exceeded. Contact Norgren directly before using the product in non-industrial applications, in
life support or other systems not covered in the published instructions.
Misuse, wear or malfunction can cause components used in pneumatic systems to fail in a variety of ways.
System designers are strongly advised to consider the failure modes of all component parts used in pneumatic systems and to
take adequate safety precautions to prevent injury to personnel and damage to equipment in the event of such a failure.
System designers are required to provide safety information to the end user in the operation of the system.
2.1. Liability
2.3. General Safety Instructions/ Proper Usage
