TCF Fellbach (2021).03
03/21
VP60 Analogue / IO-Link
Our policy is one of continued research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
1. General
1.2. Explanation of Symbols Safety Notice
1.3. Specifications
Other Symbols
The following symbols are used to emphasise instructions, outcomes, lists, references and other elements in these instructions.
DANGER
This symbol and the word ‚danger‘ indicates an immediately dangerous
situation that may result in death or serious injury if not avoided.
The factory-set capacity ranges for the valve are also indicated on the nameplate of the
respective device.
Warning!
This symbol and the word ‘warning’ indicates a potentially dangerous
situation that may result in death or serious injury if not avoided.
CAUTION!
This combination of symbol and signal word indicates apossibly hazardous situation
that may result in damage to property or environmental damage if it is not avoided.
Indicates tips and other useful information.
Other symbols
Meaning
1., 2., 3.,
Step-by-step instructions
•
Lists with no specific order
These instructions will enable you to safely install, set up and operate the proportional valve VP60 in the analogue or
IO-Link version. These instructions are an integral part of the product and must be accessible topersonnel. Personnel
must carefully read through and understand these instructions before starting work of any kind on the valves. Following
all of the safety and handling instructions contained in this manual is a fundamental requirement for safe working.
1.1 Information about these Instructions