Nordyne 10 SEER Standard Efficiency Split System, User'S Information And Installation Instructions Manual

Page: 6 / 8

6
10 SEER SPLIT SYSTEM AIR CONDITIONER
ORIFICE USAGE
REFRIGERANT CHARGING CHARTS FOR
COOLING MODE OF OPERATION
NOTE: The Refrigerant Charging Charts are applicable to
matched assemblies of our equipment and at listed airflows
for the indoor coil. Assemblies of indoor coils and outdoor
units not listed are not recommended and deviations from
rated airflows or non-listed equipment combinations may
require modifications to the expansion device(s) and
refrigerant charging procedures for proper and efficient
system operation.
Refrigerant Charging Chart — Refer to Refrigerant
Charging Charts for correct system charging and to Orifice
Usage Chart for correct restrictor sizes.
Optional Equipment — A functional checkout should be
performed in specific accordance with the checkout
procedures supplied with the equipment.
1-1/2 OUTDOOR TEMPERATURE ( °F )
TON 70 75 80 85 90 95 100 105
Suc. Liquid Disch. Liquid Disch. Liquid Disch. Liquid Disch. Liquid Disch. Liquid Disch. Liquid Disch. Liquid Disch.
Press. Press. Temp. Press. Temp. Press. Temp. Press. Temp. Press. Temp. Press. Temp. Press. Temp. Press. Temp.
67 169 137
69 170 149 182 142
71 172 160 184 152 196 147
73 173 171 187 162 199 156 210 150
75 173 193 189 172 202 164 213 158 224 154
77 189 190 203 177 217 166 228 161 239 157
79 205 189 219 177 232 168 243 163 253 160
81 221 189 234 179 247 170 258 166 268 162
83 236 189 249 180 262 172 273 168
85 252 190 264 181 277 174
87 254 200 267 191 280 183
89 269 200 282 192
91 285 201
93
* Note: All pressures are listed in psig. and all temperatures in degrees F.
- Shaded Boxes indicate flooded conditions
- Rated Design Values. Suction Pressure will be lower than design
value if indoor air flow, entering dry bulb, or entering wet bulb
temperatures are lower than design.
- Discharge temperatures greater than charted values indicate a
refrigerant undercharge.
MODEL NUMBER RESTRICTOR SYSTEM CHARGE
SINGLE PHASE SIZE (IN.) R-22 (OZ.)
1-1/2 Ton 0.053 62
2 Ton 0.060 72
2-1/2 Ton 0.067 76
3 Ton 0.073 90
3-1/2 Ton 0.077 102
4 Ton 0.082 105
5 Ton 0.093 130
THREE PHASE
3 Ton 0.073 90
4 Ton 0.082 105
5 Ton 0.093 130